Eclipse ThermJet Burners
High flame velocity improves circulation within the heated envirionment, promoting temperature uniformity. Eclipse ThermJet Burners offer the highest flame velocities available. This is important for applications such as brick kilns and heat treatment furnaces.

The Eclipse ThermJet's integrated gas and air orifices allow simpler burner piping, easier set-up and adjustment. Air and gas inlets can be independently adjusted in 90° increments to work with a variety of piping options. Installation, operation & maintenance are simple & cost effective.

Applications are: incinerators, forge and heat treat furnaces.


  1. Application flexible, The Eclipse Thermjet burner is offered with medium or high velocity and combustor options of refractory block & alloy or silicon carbide tube.
  2. Multi fuel capability. Can burn CNG (natural gas), propane or butane without a nozzle change, requiring only a gas orifice plate change
  3. Easy burner start & set up. with included air and gas orifices.
  4. Multi firing modes: high low pulse, fuel only control or on ratio control.
  5. 14 sizes: 150,000 - 20,000,000 Btu/Hr.
  6. High burner turndown range for quick temperature bring up without overshoot.
  7. There is less equipment to purchase because the Thermjet can be direct spark ignited with no pilot pipe train.

Copyright © 2022 Thermal Equipment Systems, Inc. |
| Industrial Burners
Original Artwork and Design by JH Studios, Inc. Hosted and Maintained by LLC